Description

Unleash The Power Of Red Interfaces

RedNet R1 is a versatile studio-grade desktop remote controller for Focusrite Red audio interfaces that helps you perfect your workflow. When combined with a Red interface, RedNet R1 gives you complete control of your monitor selection, source selection, and offers Dante®, Pro Tools™ | HD and Thunderbolt™ connectivity. The RedNet R1 can be used to manage remote-controllable mic preamps on your Focusrite Red interfaces, so that you can keep your interface in the rack and declutter your desktop.

With RedNet R1 connected to a Red interface, you can select inputs from one or more of eight available source groups, each comprising up to 12 channels, to a maximum of 32 total channels. Sources are selected via the front panel, or set up using the included RedNet Control application for PC and Mac. Mix and monitor in Dolby Atmos® using any combination of the selected eight source groups, in formats ranging from mono through to 12-channel audio and other 7.1.4 immersive formats.

RedNet R1 features Dante-enabled talkback with built-in microphone, and an internal mic preamp for connecting an external mic, with a high-powered headphone output, so you can monitor audio inputs and outputs, and interact with talent in another location. Up to four talkback destination groups are available when used with a Red interface (when used with other Dante devices, a single talkback group is available). There is also a headphone output that will allow you to isolate sources and audition them before playing them in your monitors.

RedNet R1 combined with Red interfaces support up to four monitoring outputs, which means you can listen to your mix in different audio formats at the touch of a button. You can easily fold-down mixes to different formats via the eight available output buttons, ensuring that you maintain a smooth workflow when working with multiple surround formats.

RedNet R1 allows you to have full control of your Red range mic preamps from the convenience of one location, improving speed and workflow. Other features include a footswitch input on quarter-inch jack, for talkback management, LFE muting and more. RedNet R1 can be powered via Ethernet to reduce cabling complexity (using the PoE standard), or by the included DC power supply.

Key Features

INTERNAL TALKBACK Note: All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω
GAIN RANGE 0dB to 55dB
TYPE Electronically Balanced, Zin = 3kΩ
MAX. INPUT LEVEL +10dBu ± 0.5dB
EXTERNAL TALKBACK Note: All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω
GAIN RANGE 0dB to 55dB
MAX. INPUT LEVEL +10dBu ± 0.5dB
FREQUENCY RESPONSE 20Hz – 20kHz ± 2dB
THD + N Less than -98dB (0.0012%) @ -1dBFS
EIN Less than -128dBu ‘A’-Weighted (typical)
SIGNAL-TO-NOISE RATIO -111dB ‘A’-Weighted (typical), min gain
COMMON MODE REJECTION RATIO 50/60Hz CMRR: <-77dB
TYPE Electronically Balanced, Zin = 3kΩ
HEADPHONE OUTPUT Note: All measurements taken at +19dBm reference level, maximum gain, RL = 600Ω
0 DBFS REFERENCE LEVELS +11dBm
FREQUENCY RESPONSE 20Hz to 20kHz ±0.5dB
THD + N -100dB (0.001%) @ -1dBFS, Rs = 150R
DYNAMIC RANGE 108dB ‘A’-weighted (typical), 20Hz – 20kHz
NOISE IN PRESENCE OF SIGNAL (NiPoS) Greater than -97 dBu ‘A-Weighted’
OUTPUT IMPEDANCE 5Ω
HEADPHONE IMPEDANCE 32Ω – 600Ω
MICROPHONE / LINE CROSSTALK
MIC INPUT TO HEADPHONE OUTPUT Less than -122dB; 20Hz – 20kHz (all other channels at 0dBFS)
HEADPHONE OUTPUT TO MIC INPUT Less than -84dB; 20Hz – 20kHz (all other channels at 0dBFS)
HEADPHONE CROSSTALK
LEFT TO RIGHT Less than -85dB; 20Hz – 20kHz (all other channels at 0dBFS)
RIGHT TO LEFT Less than -85dB; 20Hz – 20kHz (all other channels at 0dBFS)
DIGITAL PERFORMANCE
SUPPORTED SAMPLE RATES 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
CLOCK SOURCES Internal or from Dante Network Master

REAR PANEL CONNECTIVITY,
POTS & SWITCHES
EXTERNAL TALKBACK MIC INPUT 1 x XLR (F)
FOOTSWITCH 1 x 1/4” stereo jack
OUTPUTS
HEADPHONE OUTPUTS 1 x 1/4” stereo jack
POTS AND SWITCHES
POWER SWITCH 1 x Switch
TALKBACK GAIN POT 1 x Pot
TALKBACK SWITCH 1 x Tri-State Switch (External Talkback + 48V, External Talkback and Internal Talkback)
PSU & NETWORK CONNECTIONS
PSU (PoE AND DC) 1 x PoE Input and 1 x DC 12V Locking Barrel Input Connector
NETWORK 1 x Standard RJ45 connector
TOP PANEL INDICATORS
LCD SCREENS 2 x Screens (Control, Status, Metering & Menus)
CONTROL FUNCTIONS
2 x Continuous Pot (Level & Dim). 1 x Pot (Headphone Output). 24 x Multi-Function Switches
(Sources, Talkback, Monitor Outputs & Menu Items). 12 x Single-Function Switches
(Headphones, Sum, Spill, Mode, Mute, Solo, Outputs, A/B, Cut x 2, Dim & Output Lock)
POWER
POWER OVER ETHERNET (PoE) Complies with IEEE 802.3af class 0 Power-over-Ethernet standard
(PoE A or PoE B compatible)
DC POWER SUPPLY 1 x 12V 1.2A DC Power Supply
POWER CONSUMPTION PoE: 10.3W – DC: 9W (When using supplied DC PSU)
HEAT PERFORMANCE
OPERATING TEMPERATURE Operates at up to an ambient temperature of 40 degrees Celsius